Month: January 2023

  • 200-250/H iron ore crushing line in Chile

    After field investigation, the engineer found that the 200-250/H iron ore crushing line is in Chile, and recommended HPT hydraulic cone crusher as the main crushing equipment, supplemented by HJ jaw crusher coarse crushing. HPT cone crusher is a very mature and reliable crushing equipment I have used. There has been basically no problem since…

  • 250T/H copper ore processing project in Zambia

    The copper ore processing project is in Zambia, with an output of 250T/H. We have relatively high production requirements. Only high-performance equipment can guarantee high-specification copper ore production. Among the many manufacturers, we have finalized MVSI, with a good reputation, high cost performance and perfect and thoughtful service. Now we really feel it.This line is…

  • Hematite mining and crushing configuration process in Peru

    Hematite mining case construction details Hematite is blasted down from the mountain, and the stone less than 1020mm is fed into the vibrating feeder by a dump truck. The vibrating feeder evenly feeds the stone into the jaw crusher. The jaw crusher crushes the stone in the first stage, and the stone after being broken…

  • 400-500T/H granite sand production line in Australia

    400-500T/H granite sand production line in Australia

    The granite sand production line is detailed, and large pieces of material are evenly fed into the HJW145 high-energy jaw crusher through the GZD1500×6000 vibrating feeder for coarse crushing.; The roughly crushed material passes through two GZD960×3800 vibrating feeders and enters two HJ98 high-energy jaw crusher for medium crushing.; The material after medium crushing is…

  • Limestone processing project of mobile crushing production line in Crimea, Russia

    Limestone processing project of mobile crushing production line in Crimea, Russia

    The Limestone project is the construction project of the cross-Kerch Strait Bridge supported by the Russian Crimean government, and it is a government-led uranium mine backfill project. Limestone project process and configuration The entire project is uniformly operated by the intelligent control system. The material enters the KE860-1 coarse crushing mobile station from the loader…

  • 1000T/H diabase sand production line in Mongolia

    1000T/H diabase sand production line in Mongolia

    Diabase sand production line in Mongolia Config The material diabase is transported by GZD1300×4900 and GZD1500×6000 vibrating feeders to PE900×1200 and PE1200×1500 jaw crushers for rough breaking. The roughly crushed material enters the HST315 single-cylinder hydraulic cone crusher through the No. 1 underground transfer silo for medium and fine crushing, and then through four 3YZS2675…

  • Pebble sand making EPC project in Congo Gold 500-600T/H

    Pebble sand making EPC project in Congo Gold 500-600T/H

    Process and configuration of pebble sand making project Since the raw material of this project is river pebbles ≤200mm and the content of raw sand is high, the production process adopts first screening, and the raw sand is sieved through 3 sets of S5X2760-3 vibrating screens to directly produce the finished product. Materials >5mm or…

  • Comprehensive solid waste recycling project in Mexico

    Comprehensive solid waste recycling project in Mexico

    Waste Recycling Project overview The Waste Recycling project is a comprehensive recycling and reuse project of solid waste, and it is an intelligent and environmentally friendly machine sand production line. This project uses granite to make fine aggregates of 0-5mm, 5-10mm, and 10-28mm. It is satisfied with concrete aggregates, increases the fluidity and ease of…

  • Construction waste solid waste treatment project in Kazakhstan

    The customer is a Kazakhstan Renewable Resources company, which is committed to the recycling and reuse of solid waste, construction waste and other resources.The raw material of this project is construction waste, and the processed finished product is used for sand and gravel aggregates and aerated bricks. The equipment used is the MC crawler crushing…

  • Construction waste disposal project in Far East of Russia

    The Construction waste disposal project is located in the Far East of Russia. The undertaking unit is a building materials company engaged in construction waste recycling products, municipal road engineering products, and building wall materials. Primary-level resource utilization is an ideal resource-based method for construction waste disposal, and recycled aggregates from construction waste are an…

  • Granite crushing production line in Guinea

    Introduction to the production line:The project is a granite crushing production line in Guinea. The material is blasting from its own mine. The particle size of the raw material is less than 800mm, and the finished product is 0-5mm, 10-20, stone powder, and the finished product is used for export. The output is currently about…

  • River pebble gravel production line in South Africa

    Introduction to the production line: This project is a gravel production line in South Africa, the crushed material is river pebbles, and the crushed material is outsourced. The main equipment is F5X1345+, PE750X1060 jaw crusher, HST315 cone crusher, VSI6X12632 impact crusher, S5X3075-34 plus washing sand, fine sand and other equipment, the particle size of the…

  • Limestone crushing production line in the Philippines

    The project is a crushing production line in the Philippines. The crushing raw material is limestone, the material is blasted by its own mine, the particle size of the raw material is less than 1000mm, and the finished product is 0-5mm, 10-20, 10-30. Customers supply peripheral civil and high-speed projects, and the output is currently…

  • Limestone sand production line in Indonesia

    The project is a limestone sand-making production line in Indonesia. It has been repeatedly purchased many times. There are projects under discussion in the later stage. It is our key customer.The crushed material is outsourced, the particle size of the raw material is 0-10mm, and the finished product is 0-5mm for the customer’s own use.The…

  • Pebble crushing production line in Malaysia 10mm-26mm

    The project is a pebble crushing production line in Malaysian. The source of the crushing material is the winning bid for the government river section. The original crushing material is tuff, but now it is changed to river pebbles. The particle size of the raw material is 0-200mm, the natural sand content is more than…