The jaw crusher crushes various types of materials, and the fineness of the discharge is also very large. However, please note that before using the crusher to crush the materials, users should pay attention to the corresponding usage guidelines.
Precautions for the use of jaw crusher：
- Before using a jaw crusher, check to see if there are foreign objects in the crushing chamber, including residual materials from the last processing, various production tools, iron wire, iron blocks, etc.If any, take it out in time.If these things are inside, after starting the machine, the motor or iron wire may be burned out due to excessive load, and the internal jaw plate and other parts of the machine may be damaged.
- Before starting the machine, check whether the measures of the crusher have been taken, because in any case, it is the main thing, and at the same time, prevention is better than failure, so that the production can be completed more smoothly.
- Before starting the jaw crusher, check whether the screws fixing the machine are loose, whether the foundation carrying the machine is too soft, etc.If the loose screws are found, they will be reinforced in time, and if the foundation is not working, measures must be taken to strengthen it.
- Before each use of the equipment, check whether the bearings of the machine and other places that need to be lubricated are well lubricated, and whether the lubricant in the dilute oil station is sufficient.The lubrication effect of the machine is good, so that the production volume can be better, while reducing the friction between the parts.
Before starting the jaw crusher, do the necessary inspection work, especially whether the interior is clean, whether there are foreign objects, etc., only after the inspection is correct can it be used. Users must abide by the above usage guidelines, otherwise there may be dangers in the later stage.